Fields Of Heather: Little Red Truck Christmas Pillows

My daughter in laws asked for some throw pillows for Christmas, and I wanted a few for myself here as well. I have more to make, but the first two designs are done, and I love how they turned out!

The Red Truck svg is free here:

http://caluyadesign.com/old-truck-christmas-tree-free-svg.html

Ungroup, and hide the Noel. I added our last name in the Bromello font

https://www.dafont.com/bromello.font

I did not use the white circles - I liked it better without them.

Don't forget to reverse your design before cutting! I use select all and flip horizontal rather than using mirror - because that way I am sure it is all done before I start cutting.

I use a plain old iron (literally old - probably 80s model - I bought a couple of good old heavy irons at the thrift store, and love them. ) a silicone baking mat, and a pillow case. I sew my own pillow cases - details are here (and it's SUPER easy - a great beginners sewing project)

First I ironed the pillow case, and stuck the silicone baking sheet inside.

Then I layered the design on the way I wanted it to look.

Next, carefully pull back the red truck, leaving the black tires, the tree, and the name on the case, in position.

Make certain that none of the designs overlap. Trim the clear transfer sheet if needed, to make sure it is not under any of the vinyl when layering.

Cover with parchment paper. Then Press the preheated iron (I set mine between cotton and wool) down hard one section at a time, for 10 seconds each. Be careful near the edges where there are seams, try to keep the iron off the seams, so that it sits flat on the design.

Remove the parchment paper, peel back the plastic htv backing, slowly. If the edges peel up at all, replace the plastic and parchment paper and press again.